Since you don't have a tow harness easily available you'll need to first install a 4-pole connector like # 18002. The brown wire will tie into your E-450's running light circuit, yellow will tie into the left turn, green will tie into the right turn, and white will need to be mounted to an unpainted surface on the vehicle's frame for a proper ground.
From there you'll be able to install the a 7-Way connector like # 37185. If you want to run the 12 volt power wire to the 7-Way connector... view full answer...
The only available front mount trailer hitch option for a Jayco Greyhawk on a 2014 Ford E-450 Cutaway Chassis is the Draw-Tite Front Mount Trailer Hitch Receiver part # 65053 which is a direct bolt-on fit. view full answer...
We do have bushing kits for the OEM anti-sway bar on your Sea Breeze built on a 2005 Ford F-550 chassis, and the bushings include the brackets as well. There are different bushings depending on the diameter of your anti-sway bar, so you will need to measure it to ensure you get the right kit, and I'll list out the options for you:
- Rear 1-1/2" Diameter Bar: Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar # RM-4139-125
- Rear 1-3/8" Diameter Bar: Roadmaster... view full answer...
There are two Timbren Rear Suspension Enhancement Systems for a 2001 Ford F-350, part # TFR350SDF for standard models or part # TFRTT350F for service models. If you have a cab and chassis I recommend the latter as they will be better suited for this application. view full answer...
I would recommend getting one on our site that is confirmed to fit just so you don't have any other complications. The Connector you're looking at # 30955 will not work for your truck, but I have one that will! The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Connectors # C55774 will work for your 2006 Ford F350. This will just connect to your existing wiring, SUPER easy to do. view full answer...
The 2-5/16" Hitch Ball # 63840 will need a 1-7/8 inch wrench or socket like the Powerbuilt # ALL643216 to tighten the nut.
This hitch ball has a 20,000 lb capacity, is made of cold-forged steel with a chrome finish and comes with a lifetime warranty.
I've added a link to a video review of this hitch ball for you to check out. view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15845 will come down about 8 inches from the frame. It does add some support to help with an underrun in a rear end collision so as long as the drop is enough but it isn't designed for that use. It isn't anywhere near as deep a drop as an ICC bumper and if you want to add that I recommend the Buyers Products Vehicle ICC Bumper - 62" Long x 17-1/2" Tall # 3371809025 which is made for the 34 inch wide chassis... view full answer...
We have the # KS61068F available as a set that includes the left and the right with the part # KS61067-68F which you can see the price for at the attached links below. view full answer...
The Chrome Trim Ring for Command Electronics Oval LED Clearance or Side Marker Light part # 328-89-386 does just snap over the lens of the LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-52 or part # 328-K-51.
You are correct about the videos, I will put in a suggestion for a video that demonstrates both the light and the ring. The 2-Wire pigtail of the LED lights include power lead and ground wire that will connected to the existing wiring with heat shrink... view full answer...
I called Roadmaster and confirmed that for a 2006 Gulf Stream Conquest BT Cruiser on a Ford E-450 Chassis the correct steering stabilizer and brackets would be the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM47MR. view full answer...
Since your truck's frame is 34 inches from outside to outside it was definitely a cab and chassis truck at the beginning of it's life which is what the Curt hitch part # C15845 was designed to fit.
From the top of the receiver crosstube of this hitch to where it would mount on the bottom of the truck frame this hitch measures 6 inches. See attached picture. With that info you should be able to determine if the hitch would clear the fuel tank. view full answer...
You can upgrade to a beefier hitch on your 2002 Minnie Winnie with the Curt Adjustable Width Trailer Hitch Receiver, # C13702, as long as the frame of your Winnie is 18 inches to 51 inches wide. It is a Class III-rated hitch with a maximum tongue weight of 500 lbs and max gross trailer weight of 5,000 lbs. And though the hitch is capable of pulling that much weight, that does not necessarily mean your motorhome can. You will need to check your owner's manual to figure out the amount of... view full answer...
The correct steering stabilizer for the E-450 chassis on your 2005 Gulf Stream motorhome is the Roadmaster Reflex Steering Stabilizer # RM-RBK24-RSSC. Attached is a review video and the installation instructions for you to reference as well. view full answer...
Yes, I was able to contact the manufacturer of the MaxxAir Replacement Shroud for Coleman-Mach / RVP Brand RV Air Conditioners # MA8335A5261 who confirmed this is a fit for your Coleman model 8333C876 RV AC unit.
Included is a video resource for additional information. view full answer...
I recommend the Wheel Master 4-Hose Inflation Kit part # WM8001-135 for 16 inch dually wheels. The Wheel Master hoses install with your simulators and are designed with a 135 degree angle to make accessing the valve stems on the inner tire easier. I have attached a video for your reference. view full answer...
The highest capacity air helper spring kit offered for your 2012 and 2013 Ford F-550 Cab/Chassis trucks would be the Firestone Ride-Rite system, part # F2404 which provides 5600 lb of support. Neither Firestone nor Air Lift offer a higher rated system.
The # F2404 rides on the outboard side of the frame member, so in order for it to fit correctly, you'll need at least 9-1/2 inches of clearance between the frame member and the sidewall of the rear tire in order to have the proper clearance. view full answer...
If the 5th wheel you're purchasing has a 14.5K GVWR, it means that the maximum allowable weight of the trailer cannot exceed 14,500 lbs. This is well below the 16,000 lb capacity of the Curt A16 # C16120 5th Wheel hitch, so you can use it with no worries. For a 20K capacity, use # C16140
There's really no 'rule of thumb', just be sure that the capacity of the hitch exceeds the GVWR of the 5th wheel.
The # C16448-204 is a custom install bracket kit that requires some drilling into the... view full answer...
We do have a gooseneck trailer hitch that will work with your 2008 F-350 Cab and Chassis.
It is the B&W Turnoverball Underbed Gooseneck Trailer Hitch, part # BWGNRK1500. I have linked the installation instructions for this hitch you can check out. It is a custom installation and does require welding which should be done by a certified professional. This hitch has a gross towing weight capacity of 30,000-lbs. view full answer...